Specification
                              
                                
                                  
                                    | Sensor | 1/2” 1.3MP colorful CMOS image sensor | 
                                  
                                    | Resolution | 1280X1024 | 
                                  
                                    | Output interface | VGA output | 
                                  
                                    | Frame rate | 25fps | 
                                  
                                    | Signal to noise ratio | 45dB | 
                                  
                                    | Camera interface | C/CS | 
                                  
                                    | Storage | USB storage( USB support up to 2G )  | 
                                  
                                    | Control functions | Wireless remote control, R, G, B gain, exposure, "#" cross line position adjustment and parameters preserve | 
                                  
                                    | Operating temperature | 0°C-60°C  | 
                                  
                                    | power consumption | 2.1W | 
                                  
                                    | Dimension | 130*78*45mm | 
                                
                              
                               
                               
                               
                               
                               
                               
                               
                              Application
                              BVC-130   can be applied to digital storage of files, graphic identification,   microscopic image analysis and processing, fingerprint/palmprint   identification, component testing, scientific research, industrial   inspection, public security, license plate capture, traffic monitoring   and other fields.
                                
                              1.      Connected to a LCD screen with a lens. 
                              The   VGA digital camera can be connected to a LCD screen. An objective lens   is needed to install on the digital camera. A stand is needed to install   the VGA digital camera and the LCD screen.
                               
                              2.      Connected to a LCD screen on a microscope.
                              The   VGA digital camera is installed on a monocular microscope and connected   to a screen, which can display real-time images. Images can be stored   in a flash disk. 
                                
                              3.      Connected to a projector. 
                              The   VGA digital camera is installed on a monocular microscope and connected   to a projector, which can display real-time images. Images can be   stored in a flash disk. 
                              Image Transfer Software
                              The format of captured images is “RAW”, users can use the included software to transfer the images to “BMP” or “JPG” format.